Pre-Formed Corners
Factory-formed inside and outside corners deliver a consistent, reliable seal at every wall-to-wall and wall-to-floor junction.
Tile Waterproofing System Accessories
Waterproof Accessories — Corners, Collars, Tapes & Drains
A complete range of accessories engineered to complete the waterproofing detail work in showers, bathrooms and wet rooms — including inside / outside corners, pipe collars, mixing valve seals, butyl sealing tapes, washers, screws, drains, niche boxes and bench supports.
Sealing Details Corners, Collars & Seals
Butyl Tapes Self-Adhesive Sealing
System Parts Niche, Bench & Drains
Product Description
Supporting accessories for complete waterproofing systems
Waterproofing accessories support the detail work around corners, pipe penetrations, drain areas, niches, benches and mechanical fixing points — turning a single membrane or shower base into a fully sealed tile-ready assembly.
Each accessory is matched to the HIKING membrane, XPS shower base and tile-backer board range, so contractors and distributors can supply the entire wet-area system from a single source — covering sealing, taping, mechanical fixing and pre-formed system parts.
SealingCorners, collars & seals
TapesSelf-adhesive butyl tapes
HardwareWashers, screws & drains
Engineered for sealed, durable wet-area detail work
Accessories are the small components that make a waterproof system actually waterproof — pre-formed corners, collars and seals replace site-formed details that often leak, and self-adhesive tapes simplify on-site installation.
Pipe & Valve Seals
Pipe collars and mixing valve seals manage common bathroom penetrations — the area most likely to fail without a pre-formed seal.
Self-Adhesive Tapes
Self-adhesive butyl sealing tapes and waterproof sealing bandages tie seams, joints and corners into a continuous waterproof layer.
Hardware & Drains
Washers, screws and drain assemblies for mechanical fixing of tile backer board and to complete the shower drain installation.
Product Range
Accessory specification
Standard accessory categories supplied with HIKING waterproofing systems. Sizes, colors and packaging can be customized to match distributor inventory and project requirements.
| Inside / Outside Corners | Pre-formed 90° corners for wall & floor junctions | Pipe Collars | Various ID sizes — fits common pipe penetrations |
|---|---|---|---|
| Mixing Valve Seal | Pre-formed seal for shower mixing valve cut-out | Butyl Sealing Tape | Self-adhesive — seam & joint waterproofing |
| Waterproof Sealing Bandage | Membrane-faced bandage for corners & seams | Reinforcement Mesh | Glass fiber mesh — joint reinforcement |
| Washers & Screws | For mechanical fixing of XPS / tile backer boards | Drain Assemblies | Round, square & linear drain options |
| Shower Niche Box | EPS / XPS pre-formed niche — tile-ready | Shower Bench | Pre-formed XPS bench — tile-ready, waterproof |
| Pre-Slit Curved Board | Pre-slit XPS board for curved walls & columns | Service | OEM / ODM, distributor supply, export support |
Sealing, taping & mechanical fixing
The HIKING accessory range covers every detail in the waterproofing assembly — from pre-formed corners and pipe collars through self-adhesive tapes to washers, screws and drain hardware.
Sealing Components
Pre-formed corners, collars & valve seals
Pre-formed sealing components remove on-site guesswork — every internal corner, external corner, pipe penetration and mixing valve cut-out is delivered as a ready-to-bond detail piece.
- Inside corners (90° pre-formed)
- Outside corners (90° pre-formed)
- Pipe collars — multiple ID sizes
- Mixing valve seal patches
Tapes & Hardware
Butyl sealing tapes, washers & screws
Self-adhesive butyl sealing tapes and waterproof sealing bandages tie membrane seams into a continuous waterproof layer, while washers and screws provide the mechanical fixing for XPS and tile-backer boards.
- Self-adhesive butyl sealing tape
- Membrane-faced sealing bandage
- Glass fiber reinforcement mesh
- Washers & screws for board fixing
System Parts
Niche box, shower bench & pre-formed system parts
Pre-formed system parts replace site-built carpentry — a tile-ready shower niche, a waterproof shower bench, and pre-slit curved boards for columns and arches arrive ready to bond into the waterproofing assembly.
01 EPS niche box — single or split compartment
02 XPS niche box — coated tile-ready face
03 Pre-formed shower bench — waterproof core
04 Pre-slit curved board for columns & arches
05 Round drain assembly with trap & adaptor
06 Square drain assembly with grate options
07 Linear drain assembly with side / center outlet
Accessory Supply
One-source supply for complete waterproof system accessories
Order accessories alongside any main HIKING product category — waterproof membrane, XPS shower base, tile-backer board, uncoupling membrane or underfloor heating mat — and ship the entire wet-area system as a single, coordinated package.
- Inside & outside corners
- Pipe collars & mixing valve seals
- Self-adhesive butyl tapes
- Waterproof sealing bandages
- Reinforcement mesh
- Washers & screws for board fixing
- Round / square / linear drains
- Shower niche, bench & curved board
Export-ready accessory supply
Accessories are packed for safe export shipment and ready for distributor inventory, project supply, and private-label programs across global markets.
Kit packaging
Export shipment
Custom sizes
Private label
Talk to Sales
Related products
Accessories can be ordered with any main HIKING waterproofing product category.